The Ultimate Guide to Laser Cut Copper: Techniques, Machines, and Tips

Laser cutting copper is a highly precise method favored in industries ranging from electronics to jewelry making. This guide aims to provide a comprehensive overview of the techniques involved in laser cutting copper, the types of machines best suited for this material, and essential tips to ensure optimal results. As a metal known for its thermal and electrical conductivity, copper presents unique challenges and opportunities in the field of laser cutting. Whether you are a seasoned professional or a novice looking to expand your skills, this guide will equip you with the knowledge necessary to achieve precise, high-quality cuts, and capitalize on the inherent properties of copper.

What is laser cutting and how is it used to cut copper?

Image sources：https://www.precitec.cn/

Laser cutting is a thermal-based, non-contact manufacturing process that employs a focused laser beam to cut or engrave materials with high precision. In laser cutting, a high-powered laser directs a concentrated beam of light through a nozzle to a small area on the surface of the material, resulting in melting, burning, or vaporizing the material. When it comes to cutting copper, the reflective and conductive properties of the metal present unique challenges. Special techniques, such as using shorter wavelengths and specialized laser sources like fiber lasers, are often required to efficiently interact with copper’s surface. Advanced configurations, such as mixed-gas lasers or auxiliary gas flows, can also enhance the quality of the cuts, mitigating the reflectivity issues and ensuring a smooth, precise finish.

Introduction to laser cut copper

Laser cutting copper is a sophisticated process requiring advanced technology to address the metal’s high thermal conductivity and reflectivity. Here is a concise breakdown of the key techniques and technical parameters involved:

1. Laser Types and Wavelengths:

• Fiber Lasers: Most effective for copper cutting due to their shorter wavelengths (typically around 1.06 micrometers). This allows better absorption of the laser energy by copper, enhancing cutting precision.
• CO2 Lasers: Less suitable due to longer wavelengths (10.6 micrometers) which are more likely to reflect off the copper surface, resulting in inefficiency and potential equipment damage.

2. Power Settings:

• For thin copper sheets (less than 1mm), a laser power range of 500-1000 Watts is ideal.
• Thicker copper sheets (up to 3mm) may require higher power levels, around 1-2 Kilowatts, to achieve clean and precise cuts.

3. Cutting Speed:

• Cutting speed varies with the thickness of the copper. For instance, a speed of 4-8 meters per minute is effective for 1mm thick sheets, whereas thicker sheets need slower speeds of 1-3 meters per minute to ensure precision.

4. Auxiliary Gases:

• Nitrogen is commonly used to prevent oxidation and achieve cleaner cuts.
• Oxygen can increase cutting speed but may lead to oxidation and a rougher edge finish.

5. Beam Quality:

• A high beam quality (M² value close to 1) is crucial for achieving fine, precise cuts, especially in high-reflectivity materials like copper.

By fine-tuning these parameters, users can effectively harness laser technology to cut copper accurately and efficiently, overcoming the inherent challenges posed by its physical properties.

How does laser cutting work with copper?

Laser cutting of copper involves focusing a high-intensity laser beam onto the copper surface, which heats and melts the material in a localized area. The process manages the increased reflectivity and thermal conductivity of copper by utilizing fiber lasers, which have shorter wavelengths that enhance energy absorption. The melted copper is then blown away by a stream of auxiliary gas, typically nitrogen or oxygen, to clear the cut path. This precision-driven approach allows for intricate designs and clean cuts, effectively addressing the challenges posed by copper’s reflective and conductive properties. Proper adjustment of power settings, cutting speed, and auxiliary gases is crucial to achieving high-quality results.

Why is copper a preferred material for laser cutting?

Copper is a preferred material for laser cutting because of its unique combination of electrical and thermal conductivity, corrosion resistance, and aesthetic appeal. From my research on the top sources, I found that these properties enable copper to be effectively used in various high-precision applications, particularly in the electronics industry where intricate patterns and precise cuts are essential. Additionally, advances in laser technology, such as using fiber lasers, have significantly mitigated the challenges of cutting copper, making the process more efficient and yielding superior quality cuts compared to traditional methods. Combining these factors highlights copper’s suitability and versatility for laser cutting applications.

What types of laser cutters are best for copper materials?

When selecting laser cutters for copper materials, fiber lasers are generally the best choice. Fiber lasers operate at shorter wavelengths, typically around 1.06 micrometers, which improves the absorption of laser energy by copper. This wavelength is more effective in overcoming the high reflectivity and thermal conductivity of copper, ensuring efficient cutting. Furthermore, fiber lasers offer high power output and excellent beam quality, enabling precise and intricate cuts. For certain applications, CO2 lasers can also be used; however, they require additional considerations such as the incorporation of anti-reflective coatings or the use of pulsed laser modes to manage the reflectivity. Overall, fiber lasers are preferred for copper due to their superior performance and adaptability to the material’s properties.

Comparing CO2 laser cutters and fiber laser cutters

Technical Parameters Comparison:

1. Wavelength:

• CO2 Lasers: 10.6 micrometers
• Fiber Lasers: 1.06 micrometers
• Justification: The shorter wavelength of fiber lasers ensures better energy absorption by copper, enhancing cutting efficiency.

2. Power Output:

• CO2 Lasers: Typically up to 20 kW
• Fiber Lasers: Typically up to 5 kW but with higher efficiency
• Justification: Despite lower power ratings, fiber lasers’ efficiency and effective wavelength make them suitable for precise cuts in high-reflectivity materials like copper.

3. Beam Quality (M² factor):

• CO2 Lasers: Higher M², generally between 1.1 to 1.3
• Fiber Lasers: Lower M², typically close to 1.0
• Justification: Lower M² value in fiber lasers results in superior beam focus, essential for intricate and high-precision cutting.

4. Reflectivity Handling:

• CO2 Lasers: Require anti-reflective coatings or pulsed modes
• Fiber Lasers: Naturally suited for high reflectivity
• Justification: Fiber lasers are intrinsically designed to handle reflective surfaces without additional modifications, unlike CO2 lasers.

5. Thermal Conductivity Mitigation:

• CO2 Lasers: Less effective due to longer wavelength
• Fiber Lasers: More effective due to shorter wavelength and higher energy concentration
• Justification: Higher energy concentration at the shorter wavelength of fiber lasers efficiently overcomes the thermal conductivity of copper.

In conclusion, while both CO2 and fiber laser cutters have their specific applications, fiber lasers generally outperform CO2 lasers in cutting copper due to their wavelength efficiency, better beam quality, and effective handling of the material’s high reflectivity and thermal conductivity.

Choosing the right cutting machine for copper

When selecting the right cutting machine for copper, I must consider several critical factors to ensure optimal performance and efficiency. From my research on the top three websites, it is evident that the key parameters are beam quality, wavelength efficiency, and thermal conductivity handling. Fiber lasers stand out as the superior choice primarily because of their lower M² factor, which translates to better beam focus, essential for precise and intricate cutting tasks. Additionally, fiber lasers’ shorter wavelength allows for more efficient energy concentration, thus overcoming copper’s high thermal conductivity. Furthermore, fiber lasers require no additional modifications to handle the reflective properties of copper, unlike CO2 lasers that often need anti-reflective coatings. In summary, fiber lasers are the more efficient and adaptable option for cutting copper, offering enhanced precision and reduced need for modifications.

Advantages of using fiber lasers for copper laser cutting

Fiber lasers offer several key advantages when it comes to cutting copper, largely due to their technical superiority and material compatibility:

1. Wavelength Efficiency: Fiber lasers operate at shorter wavelengths (typically around 1.06 micrometers) compared to CO2 lasers (10.6 micrometers). This shorter wavelength is more efficiently absorbed by copper, resulting in more effective cutting with reduced energy waste.

2. Beam Quality: Fiber lasers possess a lower M² factor (close to 1), indicative of a high-quality, concentrated beam. This allows for precise, intricate cuts that are essential for detailed copper work. The improved focusability translates to finer edges and reduced kerf width.
3. Thermal Management: Copper’s high thermal conductivity can dissipate heat rapidly, making it challenging for lasers to cut effectively. Fiber lasers manage this thermal issue better due to their efficient energy transfer and focused beam that delivers higher power density to the cutting area.
4. Reflectivity Handling: Copper’s high reflectivity can pose significant challenges for CO2 lasers, often requiring the use of anti-reflective coatings or specialized optics. Fiber lasers, due to their shorter wavelength, handle reflective surfaces more adeptly without the need for additional modifications, thus ensuring uninterrupted cutting performance.
5. Maintenance and Operational Costs: Fiber lasers generally have fewer moving parts and require less maintenance compared to CO2 lasers. This translates to lower operational costs and less downtime, enhancing overall productivity.

In light of these technical parameters—wavelength efficiency, beam quality, thermal management, and reflectivity handling—fiber lasers are unequivocally the superior choice for copper laser cutting applications.

What are the important factors to consider in the cutting process?

When considering the cutting process for materials such as copper, several important technical factors must be taken into account to ensure optimal results:

1. Material Thickness: The thickness of the copper sheet directly impacts the choice of laser power and cutting speed. Thicker materials require higher power settings to achieve clean cuts.
2. Laser Power and Speed: Both laser power and cutting speed must be meticulously calibrated to the material properties. Insufficient power or excessive speed can result in incomplete cuts or poor edge quality, whereas excessive power can cause warping due to excessive heat.
3. Gas Assist Parameters: The type and pressure of the assist gas, commonly nitrogen or oxygen, influence the cutting quality and speed. Oxygen can enhance cutting speed but may lead to oxidation, while nitrogen yields cleaner cuts without oxidation.
4. Focus Position and Beam Alignment: Proper focus positioning and beam alignment are critical for achieving accurate and consistent cuts. Misalignment can lead to defects such as rough edges or inconsistent cut depths.
5. Cooling and Heat Dissipation: Efficient cooling mechanisms must be in place to handle the high thermal conductivity of copper, ensuring that the material does not overheat and cause warping or other thermal damage.
6. Material Reflectivity: Considering copper’s high reflectivity, utilizing lasers with shorter wavelengths (such as fiber lasers) can mitigate issues related to reflection and enhance cutting efficiency.

By carefully managing these factors, the cutting process can be optimized to deliver superior precision and efficiency, especially when utilizing advanced fiber laser technology.

Impact of copper’s reflectivity on laser cutting

Copper’s high reflectivity significantly impacts the laser cutting process. Copper tends to reflect the majority of the incident laser energy, especially at longer wavelengths (such as CO2 lasers, ~10.6 micrometers). This characteristic can lead to inefficient cutting and reflects a great deal of the laser power back into the system, risking damage to the laser source.

To mitigate these issues, the following technical parameters should be optimized:

1. Wavelength Selection:

• Fiber Lasers: Use fiber lasers or other solid-state lasers with shorter wavelengths (typically around 1.06 micrometers) as they are better absorbed by copper, improving cutting efficiency.

2. Laser Power:

• High Power Output: Employ high power settings to ensure adequate energy is delivered to the highly reflective copper surface. Power levels typically range from 1 kW to 6 kW, depending on the thickness of the copper material.

3. Assist Gas:

• Type: Use nitrogen assist gas to prevent oxidation and achieve cleaner cuts, as oxidation can further affect reflectivity and quality.
• Pressure: Maintain high assist gas pressure, generally ranging from 10 to 20 bar, to effectively blow molten material away from the cut zone.

4. Protective Coatings:

• Apply anti-reflective coatings on critical laser component surfaces to reduce damage risk from reflected laser energy.

5. Focus and Spot Size:

• Tight Focus: Ensure a tightly focused laser beam to maximize energy density at the cutting point.
• Proper collimation and beam quality (M² value) should be maintained to ensure precision in focusing.

By optimizing these parameters, laser cutting efficiency can be significantly improved, reducing the adverse effects associated with copper’s high reflectivity. These adjustments ensure precise, high-quality cuts even in the presence of copper’s challenging reflective properties.

Managing laser energy for optimal cut quality

To manage laser energy effectively for optimal cut quality while processing copper, several key parameters must be controlled. Firstly, the selection of appropriate laser wavelength is critical; utilizing fiber lasers around 1.06 micrometers ensures better absorption by the copper material. High laser power output, typically between 1 kW to 6 kW, should be employed to deliver sufficient energy to the reflective surface. The use of nitrogen as an assist gas, maintained at high pressures ranging from 10 to 20 bar, helps in preventing oxidation and achieving cleaner cuts. Anti-reflective coatings on laser components reduce the risk of damage from reflected energy. Furthermore, maintaining a tightly focused laser beam with excellent collimation and beam quality (M² value) ensures high energy density at the cutting point, thereby enhancing precision and cut quality. By optimizing these factors, cutting efficiency is significantly improved despite the challenging reflective properties of copper.

Handling potential damage while cutting reflective materials

When it comes to cutting reflective materials such as copper, managing potential damage to laser components is paramount. Reflective surfaces can bounce a significant portion of the laser energy back towards the source, risking damage to critical laser elements. To mitigate this, I ensure the use of advanced anti-reflective coatings on all laser optics, which substantially reduce the amount of reflected energy reaching the laser. Additionally, I select fiber lasers over CO2 lasers, since their wavelength is better absorbed by metals like copper, thus minimizing reflectivity issues. Employing a laser with adaptive optics and real-time beam monitoring helps maintain optimal focus and beam shape, further reducing the risk of reflection-related damage. By implementing these strategies, I can effectively manage and minimize potential damage while achieving precise cuts on reflective materials.

How to optimize cutting speeds and laser settings for copper laser cutting?

To optimize cutting speeds and laser settings for copper laser cutting, it is essential to consider factors such as laser power, assist gas, and feed rate. Begin by selecting a high-power fiber laser, as its wavelength is more suitable for cutting copper due to better absorption properties. Utilize nitrogen or air as assist gas to prevent oxidation and achieve cleaner cuts. Adjust the feed rate to balance between cutting speed and precision; lower speeds may be required for thicker materials to ensure complete penetration and smooth edges. Regularly monitor and calibrate the focus and beam quality to maintain optimal performance. By fine-tuning these parameters, cutting efficiency and quality can be significantly enhanced when working with copper.

Adjusting laser power and wavelength

To adjust laser power and wavelength effectively for copper laser cutting, it is crucial to understand the specific requirements and performance characteristics of the equipment and material.

Laser Power:

1. Wavelength:

• • Fiber Lasers (1.06 μm): Optimal for metal cutting, including copper, due to higher absorption rates. Standard fiber laser wavelengths offer precision, reducing reflectivity issues commonly seen with CO2 lasers.
  • Power Levels:
  • Typical fiber laser power settings for copper cutting:
  • Nitrogen or compressed air: Preferred over oxygen to prevent oxidation.
    • Pressure Settings:
  • Adjustable Focus: Essential for maintaining beam quality and cutting precision, particularly for varying material thicknesses.
    • Focus Position Adjustments: Typically vary from -1 mm to +1 mm, depending on the material thickness and desired edge quality.

  • Wavelength Justification:

    • The absorption of the 1.06 μm wavelength by copper is significantly higher (by a factor of more than 10) compared to the 10.6 μm CO2 laser wavelength, making fiber lasers more efficient and reliable for copper cutting.

    By implementing the above adjustments and considering these technical parameters, the process of copper laser cutting can be significantly optimized, yielding precise and efficient results.

Techniques for ensuring precise laser cut copper parts

1. Material Preparation: Prior to cutting, ensure that the copper sheets are clean and free from any contaminants. Surface impurities can interfere with the laser cutting process, leading to imperfections. Use suitable cleaning agents to remove any oils, dust, or oxide layers that may be present on the material.
2. Beam Focus and Alignment: Proper focus and alignment of the laser beam are critical for achieving high-precision cuts. Utilize auto-focus systems to maintain consistent focal distance across the entire cutting area. Regularly calibrate the machine’s optics to ensure the beam is accurately aligned and concentrated.
3. Cutting Speed and Power Settings: Fine-tuning the cutting speed and power settings is essential for high-quality edges and minimizing heat-affected zones. Utilize manufacturer-recommended parameters as a starting point, and make incremental adjustments based on the material thickness and desired edge quality. Monitor the cut in real-time to make on-the-fly adjustments if necessary.
4. Heat Management: Managing the heat generated during the cutting process is crucial for preventing warping or distortion of the copper parts. Implement effective cooling strategies such as using a high-pressure nitrogen or compressed air assist gas to dissipate heat quickly from the cutting zone.
5. Quality Monitoring Systems: Integrate advanced monitoring systems such as cameras or sensors to continuously check the quality of the cut. These systems can detect deviations in real-time and allow for immediate corrective actions to be taken, ensuring consistency and precision.

By implementing these techniques, precise and high-quality laser-cut copper parts can be consistently achieved, enhancing performance and overall efficiency in production runs.

Using the right cutting speeds for different thicknesses of copper materials

Selecting the appropriate cutting speed for various thicknesses of copper is critical for ensuring optimal cut quality and process efficiency. Below are the recommended cutting speeds based on copper thickness, along with the justification for these technical parameters:

| Copper Thickness (mm) | Cutting Speed (mm/min) | Justification |

|———————–|————————|—————|

| 1.0 | 2400 | For thin copper sheets (1 mm), a high cutting speed ensures quick processing while maintaining edge quality. The lower thermal mass of the material allows for faster heat dissipation. |

| 2.0 | 1800 | As thickness increases to 2 mm, a moderate cutting speed strikes a balance between effective heat management and cut quality, preventing excessive heat accumulation. |

| 3.0 | 1500 | For 3 mm thick copper, a slower cutting speed is necessary to ensure complete penetration and minimize the risk of incomplete cuts, while managing the thermal input. |

| 5.0 | 1000 | At 5 mm thickness, a significantly reduced cutting speed is essential to ensure sufficient energy is delivered to achieve full-depth cutting. This speed helps to maintain dimensional accuracy and edge integrity. |

These parameters are designed to optimize the cutting process by matching the laser’s power delivery with the material’s thermal and physical properties. Adjustments to these speeds may be necessary based on specific laser system capabilities and material composition, but these values provide a robust starting point for high-quality laser cutting of copper materials.

What are common applications of copper laser cutting?

Copper laser cutting is widely employed in various industries for its precision and efficiency. Common applications include the fabrication of electrical components such as circuit boards and connectors, due to copper’s excellent electrical conductivity. Additionally, it is used in creating intricate parts for the automotive and aerospace sectors, where precise dimensions and minimal waste are critical. In the HVAC industry, laser-cut copper sheets are utilized for constructing heat exchangers and other thermal management systems. The medical industry also benefits from copper laser cutting, particularly in producing components for medical devices and equipment where accuracy is paramount.

Industrial uses of laser-cut copper in metal fabrication

Laser-cut copper is extensively utilized across various metal fabrication industries due to its superior properties, such as exceptional thermal conductivity, high corrosion resistance, and excellent ductility. Below are some of the key industrial uses:

1. Electrical Industry: In the production of electrical components, such as busbars, transformers, and circuitry parts, laser-cut copper is favored for its precision and ability to create complex shapes with minimal burr formation. The high electrical conductivity of copper makes it ideal for these applications, ensuring efficient energy transfer and connectivity. Typical parameters for cutting thin copper sheets (1-3 mm) in this industry include laser powers of 500-1500 W, with cutting speeds ranging from 600 to 1200 mm/min, to maintain both speed and accuracy.
2. Automotive and Aerospace Sectors: Laser-cut copper is indispensable for crafting intricate, high-precision components like gaskets, heat exchangers, and EMI shielding products. The precise cutting process minimizes material wastage and ensures that components meet stringent tolerances required in these sectors. When processing thicker copper sheets (3-5 mm), a more powerful laser (over 2000 W) and slower cutting speeds (200-600 mm/min) are used to achieve the desired depth and edge quality, while maintaining structural integrity.
3. HVAC Systems: The efficient thermal management properties of copper are leveraged in HVAC systems to produce components such as heat exchangers, tubing, and cooling plates. Laser cutting technology enables the manufacturing of these elements with high precision and repeatability, critical for maintaining performance standards. Laser power settings for HVAC applications usually range from 1000 to 3000 W, with cutting speeds adjusted according to material thickness and desired cut quality.

These applications underscore the critical role of laser-cut copper in modern metal fabrication, providing high precision, efficiency, and reliability necessary for advanced industrial manufacturing.

Custom laser cut copper parts for electronics

When it comes to custom laser-cut copper parts for electronics, three main factors distinguish top-tier providers: precision, material integrity, and customization capabilities. From my research on the leading websites, such as those from ULS (Universal Laser Systems), Epilog Laser, and Trotec Laser, several critical technical parameters are consistently highlighted.

1. Precision: Achieving accurate and consistent cuts is paramount. The recommended laser power settings for cutting copper in electronics applications typically range from 500 to 1500 W, similar to those used in thin sheet processing. These settings are vital for maintaining the dimensional accuracy required for electronic components, which often feature intricate designs.
2. Material Integrity: To preserve the electrical and thermal properties of copper, it is essential to minimize heat-affected zones (HAZ). Using lasers with shorter wavelengths (e.g., fiber lasers) and high beam quality helps in achieving clean cuts with minimal thermal distortion. Optimal cutting speeds for electronic parts usually range between 600 to 1200 mm/min, balancing cut quality and efficiency.
3. Customization Capabilities: Advanced laser systems support diverse design inputs and can handle complex geometries, which is crucial for custom electronic parts. Providers often emphasize the use of software integration with CAD platforms, allowing for precise replication of detailed designs. For thicker materials or more complex cuts, laser powers exceeding 2000 W may be used, albeit at slower speeds (200-600 mm/min) to ensure quality and structural integrity.

These parameters are validated by industry practices and ensure that custom laser-cut copper parts meet the stringent requirements of modern electronics manufacturing.

Decorative and artistic applications of laser engraving on copper

Laser engraving on copper opens up a myriad of possibilities for decorative and artistic applications, where precision and detail are paramount. This technology is utilized to create intricate designs on copper surfaces used in art, jewelry, and home decor. The superior control afforded by laser systems allows for the creation of highly detailed patterns, logos, and text with remarkable accuracy.

From a technical perspective, laser engraving on copper typically utilizes fiber lasers due to their high beam quality and efficiency in processing reflective materials. Key parameters involved in laser engraving include the following:

1. Laser Power: Engraving operations generally use lower laser powers compared to cutting, with typical settings ranging from 20 to 100 W. This range ensures precise control over depth and detail without excessive material removal.
2. Engraving Speed: To achieve high-resolution engravings, speeds are carefully adjusted. Common engraving speeds vary between 300 to 800 mm/s, balancing detail fidelity with production efficiency.
3. Frequency and Pulse Duration: High-frequency settings (20-80 kHz) are often employed to achieve smooth finishes, and pulse durations are optimized based on the specific application, ensuring minimal thermal impact on the material.
4. Resolution: The resolution of the engraving, usually measured in dots per inch (DPI), can range from 500 to 1200 DPI, depending on the level of detail required.

These parameters are drawn from current industry standards and reflect common practices within the top-ranked references on laser engraving techniques. By adhering to these guidelines, artisans and manufacturers can produce visually stunning and precisely detailed copper pieces suited for a wide array of decorative purposes.

Frequently Asked Questions (FAQs)

Q: What is laser cut copper?

A: Laser cut copper involves using a laser cutting machine to precisely cut copper sheets or workpieces through the application of a focused laser beam. This method is highly accurate and suitable for producing complex, high-precision parts.

Q: Can fiber laser cutting be used for copper?

A: Yes, fiber laser cutting can be used for copper, although it requires careful consideration due to copper’s high reflectivity and conductivity. Modern fiber lasers are designed to handle these challenges, making the process more efficient.

Q: What should I be aware of when cutting copper with a fiber laser?

A: When cutting copper with a fiber laser, it is important to consider the material’s high reflectivity, which can affect the efficiency of the laser cutting machine. Proper laser optics and settings can help achieve the best results.

Q: What is the role of laser optics in cutting copper?

A: Laser optics play a crucial role in focusing the laser beam accurately onto the material surface, ensuring effective cutting. High-quality optics are essential for achieving precise cuts, especially when dealing with reflective materials like copper.

Q: How does copper’s material surface affect laser cutting?

A: The material surface of copper can affect the laser cutting process due to its high reflectivity of infrared light. Surface preparation or using lasers with specific wavelengths can help mitigate these effects for better cutting performance.

Q: What is the typical wavelength used in fiber laser cutting for copper?

A: The typical wavelength used in fiber laser cutting for copper is around 1.07 microns (1070 nm) in the infrared spectrum. This wavelength is effective for cutting materials including copper due to its ability to be absorbed by the material.

Q: How do you achieve high precision when laser cutting copper?

A: Achieving high precision when laser cutting copper involves using a high-quality fiber laser cutting machine, optimizing laser parameters, and ensuring proper material handling. Precision is crucial for producing detailed and complex laser cut parts.

Q: What are the common alloys of copper used in laser cutting?

A: Common alloys of copper used in laser cutting include pure copper (often referred to as electrolytic copper) and copper-based alloys like brass. Each type has specific characteristics that may influence cutting performance and results.

Q: Can thicker materials of copper be cut with a laser cutting machine?

A: Yes, thicker materials of copper can be cut with a laser cutting machine, although it requires more powerful lasers and optimized settings. The cutting of thicker workpieces may involve adjustments in laser power, speed, and assist gases such as nitrogen.

Q: Where can I get more information or assistance with laser cut copper?

A: For more information or assistance with laser cut copper, you can contact us. Our experts can provide guidance, answer questions, and help ensure you achieve the best results with your laser cutting projects.